Top 10 Best Bmw 5 Series Oil Series

1Valvoline European Vehicle Full Synthetic 5W-30 XL-III Motor Oil 5 Quart

Best in Budget

• Advanced protection for European gasoline and diesel engines against the four main causes of engine breakdown: wear, friction, heat and deposits
• Contains low-SAPS (Sulfated Ash, Phosphorus, and Sulfur) for compatibility with the emissions system
• Exceptional high/low temperature protection to defend your engine in extreme driving conditions and climates
• Superior antioxidants and cleaning detergents combine to safeguard against damaging deposits and sludge
• Advanced anti-wear additives offer extra wear protection vs. industry and OEM standards

2BMW Motorrad Advantec 5W-40 Motor Oil

Editor’s Pick

3Valvoline European Vehicle Full Synthetic 5W-40 Motor Oil 5 Quart

People’s Choice

• Advanced protection for European gasoline and diesel engines against the four main causes of engine breakdown: wear, friction, heat and deposits
• Contains low-SAPS (Sulfated Ash, Phosphorus, and Sulfur) for compatibility with the emissions system
• Exceptional high/low temperature protection to defend your engine in extreme driving conditions and climates
• Superior antioxidants and cleaning detergents combine to safeguard against damaging deposits and sludge
• Advanced anti-wear additives offer extra wear protection vs. industry and OEM standards

4Mobil 1 FS European Car Formula Full Synthetic Motor Oil 0W-40, 5 Quart

• Protects for 15,000 miles – guaranteed**
• Has excellent low temperature capabilities for rapid engine protection at start-up
• Delivers fast protection for reduced engine wear and deposits
• Formulated for European vehicles

5Motul 8100 X-Cess SAE 5W-30 100% Synthetic Engine Oil, BMW LL-01 MB 229.5 MB 226.5 VW 502 00 505 00 Renault RN0710 Approved, ACEA A3/B4 Full SAPS High HTHS, European Car Formula, 5 L

• BMW LL-01, MB 229.5, VW 502 00 OEM Approved: Carries official OEM approvals from BMW LL-01, Mercedes-Benz MB-Approval 229.5, Mercedes-Benz MB-Approval 226.5, Volkswagen/Audi VW 502 00 and 505 00, and Renault RN0710/RN0700, covering a broad range of European gasoline and diesel engines without particulate filters. These are formal manufacturer approvals verified on the Motul Technical Data Sheet, not 'recommended for' claims. Warranty-compliant for out-of-warranty and late-model BMWs (3-Series, 5-Series, X3, X5), Mercedes C-Class and E-Class, and VW/Audi models requiring the 502 00 specification
• High HTHS Full SAPS Protection: Formulated with a high HTHS viscosity of 3.5 mPa.s at 150 degrees C, delivering robust oil film resistance under extreme shear and thermal stress that turbocharged and high-revving engines demand. The Full SAPS additive chemistry (ACEA A3/B4) provides maximum detergent and anti-wear protection without the restrictions of Low SAPS formulations designed for emissions systems. API SL/CF certified. This is the oil for performance driving, canyon runs, and occasional track days where oil film integrity is non-negotiable
• Extended Drain Interval Capability: Engineered with a Total Base Number (TBN) of 12.5 mg KOH/g that provides outstanding acid neutralization capacity over extended service intervals as recommended by European manufacturers. The high TBN maintains oil alkalinity and detergent effectiveness even under the severe conditions of turbocharged direct-injection engines that produce higher levels of combustion byproducts. 100% synthetic base stocks resist oxidation and thermal breakdown, maintaining viscosity stability throughout the full drain interval
• Cold Start Protection and Thermal Stability: 100% synthetic base stocks deliver a pour point of -33 degrees F for rapid oil circulation during cold starts, minimizing metal-on-metal wear before the engine reaches operating temperature. Flash point of 446 degrees F resists thermal breakdown under sustained high-load conditions.
• Broad European Vehicle Fitment, Full SAPS for Non-DPF Engines: Compatible with BMW 3-Series (E46, E90, F30), 5-Series (E60, F10), X3, X5 with N52, N54, N55, and early B58 engines; Mercedes-Benz C-Class (W204, W205), E-Class (W212, W213), ML/GLE; VW/Audi Mk5/Mk6 GTI, B8 A4, and Renault models requiring RN0710 or RN0700. Also carries the MB 226.5 and VW 505 00 diesel approvals for non-DPF diesel engines. This Full SAPS formulation is designed for gasoline and diesel engines without Diesel Particulate Filters. 5 liter format provides the correct fill volume for most European vehicle oil changes

6Castrol EDGE 5W-30 Advanced Full Synthetic Motor Oil, 5 Quarts

• 3X Stronger than the leading full synthetic*
• 10X Better high stress performance**
• 20,000 miles between oil changes***
• *Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• **As measured in Seq IX test under high load/torque conditions vs. API SQ test limits

7MOTUL 8100 X-Cess Gen 2 SAE 5W40 Full Synthetic Motor Engine Oil 5 Liter Bottle

• Formal OEM approvals across the European performance car landscape: Motul 8100 X-Cess Gen2 5W-40 carries BMW Longlife-01, Mercedes-Benz MB-Approval 229.5 and 226.5, Porsche A40, Volkswagen 502 00 and 505 00, Renault RN0710 and RN0700, FIAT 9.55535-H2 M2 N2 Z2, and GM-Opel LL B-025. One oil covers a multi-brand European garage. Fits out-of-warranty BMW M3 (E46, E92, F80), Porsche 911 (996, 997, 991), Mercedes-Benz AMG (W204 C63, W212 E63), and Audi S4 platforms.
• Thermal stability engineered for turbocharged and direct-injection engines: HTHS viscosity of 3.8 mPa.s at 150 degrees Celsius holds a robust oil film under extreme load. Viscosity index of 186 and flash point of 228 degrees Celsius (442 Fahrenheit) keep the formulation stable during track-day heat soak and sustained high-RPM highway operation. Built for the N54, N55, B58, M156, and 3.0T TFSI engine families.
• Extended drain interval support through high detergent and dispersant power: Total Base Number of 10.2 mg KOH per gram resists soot and sludge accumulation, supporting the longer oil change intervals recommended by European manufacturers. Catalytic converter compatibility is preserved, protecting the emissions system and preventing costly exhaust component failures over the life of the vehicle.
• Cold start protection to minus 49 Fahrenheit pour point: Rapid oil circulation on a freezing winter morning minimizes wear on the valvetrain during the most damaging operating phase of any engine. Critical for BMW VANOS and Valvetronic systems, Porsche VarioCam, and Mercedes-Benz timing chain assemblies that depend on instant pressure at first turnover.
• North American BMW gasoline engines and full-SAPS applications: Motul 8100 X-Cess Gen2 is the BMW Longlife-01 product for pre-2019 BMWs sold outside the European Union, not the Longlife-04 formulation (which is Motul X-Clean Gen2). Not suitable for modern diesel engines fitted with a diesel particulate filter. For DPF diesels, use Motul X-Clean Gen2. The 5 Liter jug supports a standard European oil service interval with headroom for top-off.

8Motul 8100 X-Cess SAE 5W-30 100% Synthetic Engine Oil, BMW LL-01 MB 229.5 MB 226.5 VW 502 00 505 00 Renault RN0710 Approved, ACEA A3/B4 Full SAPS High HTHS, European Car Formula, 1L

• BMW LL-01, MB 229.5, VW 502 00 OEM Approved: Carries official OEM approvals from BMW LL-01, Mercedes-Benz MB-Approval 229.5, Mercedes-Benz MB-Approval 226.5, Volkswagen/Audi VW 502 00 and 505 00, and Renault RN0710/RN0700, covering a broad range of European gasoline and diesel engines without particulate filters. These are formal manufacturer approvals verified on the Motul Technical Data Sheet, not 'recommended for' claims. Warranty-compliant for out-of-warranty and late-model BMWs (3-Series, 5-Series, X3, X5), Mercedes C-Class and E-Class, and VW/Audi models requiring the 502 00 specification
• High HTHS Full SAPS Protection: Formulated with a high HTHS viscosity of 3.5 mPa.s at 150 degrees C, delivering robust oil film resistance under extreme shear and thermal stress that turbocharged and high-revving engines demand. The Full SAPS additive chemistry (ACEA A3/B4) provides maximum detergent and anti-wear protection without the restrictions of Low SAPS formulations designed for emissions systems. API SL/CF certified. This is the oil for performance driving, canyon runs, and occasional track days where oil film integrity is non-negotiable
• Extended Drain Interval Capability: Engineered with a Total Base Number (TBN) of 12.5 mg KOH/g that provides outstanding acid neutralization capacity over extended service intervals as recommended by European manufacturers. The high TBN maintains oil alkalinity and detergent effectiveness even under the severe conditions of turbocharged direct-injection engines that produce higher levels of combustion byproducts. 100% synthetic base stocks resist oxidation and thermal breakdown, maintaining viscosity stability throughout the full drain interval
• Cold Start Protection and Thermal Stability: 100% synthetic base stocks deliver a pour point of -33 degrees F for rapid oil circulation during cold starts, minimizing metal-on-metal wear before the engine reaches operating temperature. Flash point of 446 degrees F resists thermal breakdown under sustained high-load conditions.
• Broad European Vehicle Fitment, Full SAPS for Non-DPF Engines: Compatible with BMW 3-Series (E46, E90, F30), 5-Series (E60, F10), X3, X5 with N52, N54, N55, and early B58 engines; Mercedes-Benz C-Class (W204, W205), E-Class (W212, W213), ML/GLE; VW/Audi Mk5/Mk6 GTI, B8 A4, and Renault models requiring RN0710 or RN0700. Also carries the MB 226.5 and VW 505 00 diesel approvals for non-DPF diesel engines. This Full SAPS formulation is designed for gasoline and diesel engines without Diesel Particulate Filters. 5 liter format provides the correct fill volume for most European vehicle oil changes

9HU816x Oil Filter Fit for BMW 1,3,5,6,7,11427953129 11427541827 (2Pcs)

• 【Function】HU816x Oil Filter is Made of High-Quality Metal and Paper Materials with Stable Performance,Which can Effectively Filter Sand,Dirt and Other Impurities in the Oil,Thereby Reducing Parts Wear and Protecting the Engine Operation.
• 【Replaces#】HU816x, 11427953129, 11427541827.Please Check the OEM Part Number and Make Sure Your Part Number Matches this Part Number Before Buying!
• 【Compatible】Fit for BMW Vehicles: 2008-2013 128i/135i; 2006-2010 130i/325i; 2006-2011 323i; 2007-2013 328i; 2009-2013 328i xDrive; 2007-2008 328xi/335xi; 2007-2015 335i; 2014-2016 335i GT xDrive/M235i; 2009-2015 335i xDrive; 2011-2013 335is.For More Models,Please Refer to the Adaptation Table or Detailed Description.
• 【Premium Quality】Tested & Certified to Meet or Exceed OEM Quality Standards.All Products are 100% Tested Before Leaving the Factory.Made of High Quality Material.
• 【Warranty】The Oil Filter come with 12 Month Warranty. Hassle-free Return and Refund Policy. Please Buy it with Your Confidence.

10Valvoline European Vehicle Full Synthetic 5W-40 Motor Oil 1 Quart

• Advanced protection for European gasoline and diesel engines against the four main causes of engine breakdown: wear, friction, heat and deposits
• Contains low-SAPS (Sulfated Ash, Phosphorus, and Sulfur) for compatibility with the emissions system
• Exceptional high/low temperature protection to defend your engine in extreme driving conditions and climates
• Superior antioxidants and cleaning detergents combine to safeguard against damaging deposits and sludge
• Advanced anti-wear additives offer extra wear protection vs. industry and OEM standards